Electronic RC Switch

Electronic RC switch to remove the potential fault of mechanical RC switches used in RC planes. This uses a few components to build up a simple but effective circuit.

The circuit is based on the work of Denny Vollrath on RCGroups.

Components required:

1 x MosFet transistor – FQP50N06L 
2 x 0.1uF ceramic capacitor (alternatively electrolyte)
1 x 47k resistor
1 x on/off switch or wire to shortcut pins
2 x servo eller battery connector wires

If you like to print your own PCB based on this design please download the Gerber file

Toppside PCB
Underside view of PCB
PCB Layers